Sunny Tripower CORE2

• Download latest update file from section „Software“ in Download area

• Ensure that solar irradiation is available for another 60 minutes. AC supply is not sufficient.

• Establishing a connection to the user interface
  Generally applicable access address: IP address manually assigned or assigned by the DHCP server (router) (identification via network scanner software or network configuration of the router).
  Access address for Apple, Android, Windows and Linux systems:
  SMA[serial number].local (e.g. SMAA2102031234.local)
  Standard inverter IP address fort he direct connection via Ethernet:
  169.254.12.3

• Logging In the User Interface
  Log in as Installer

  1. Select [Login] in upper right corner of the screen.

  2. Enter password in the field Password.
     The standard password for user group Installer is pw1111.

  3. Select [Login].

• Mandatory: Configuring the Country Data Set

  1. Select [Device Monitoring] in the menu.

  2. Select [Initialization].

  3. Open drop-down menu Grid Standards (Region) and select the required country code.

  4. Confirm changes with [Save Settings].

• Updating the Firmware

  1. Select [Device] in the menu.

  2. Select [Firmware Update] in the sub-menu.

  3. Click [Select a Firmware File] and navigate to the update file fort he inverter.

  4. Follow the instructions in the upcoming dialog.

• Keep the browser window open until the update is finished.

• Double-check the successful update via the menu [About].

• The Sunny Tripower CORE2 is controlled and monitored via Modbus Sunspec by the Data Manager.

• One or multiple inverters can be registered as Modbus devices in the commissioning dialog. In step „Modbus registration“ please use the profile „Sunspec Modbus“ and Unit ID „1“. In the following step the country code can be selected for all connected devices.

• In case of an already commissioned Sunny Data Manager M the Sunny Tripower CORE2 can also be added easily:

Registering a New Modbus Device and Assigning a Modbus Profile

Requirements:

• The Modbus devices must be in operation and connected to the Data Manager.

Procedure:

1. Log into the user interface of the Data Manager.

2. Select the menu item Device administration in the menu Configuration.

3. Select the button.

4. Select Modbus devices and confirm with [Next].

5. Fill out the input fields and confirm with [Next].

   • Select Modbus profile „SunSpec“.

   • Keep Unit ID to „1“.

   • Available Modbus devices in the system are searched for and displayed.

6. Select the Modbus devices to be added to the system and select [Save].